Dale's Concours C14 slip-on is a real work of art. It features our polished 304 air craft stainless high flow mid pipe, stainless hardware with custom clamps, no springs, and a hand crafted center stand stop.Our Holeshot 17" Concours mufflers are carefully assembled in house, and are available either fully polished or with the satin black outer skin.Our Holeshot Performance laser etch mark is now standard on all end caps as shown, and our logo plate can be added as an option. If you want the most power and torque go with the Comp 2 core, and also dont worry about it being super loud, because running it with the original front header its really not until you really whack it open hard. If you want it more stealth then consider our street core that will only make about 1.5 less hp. Not only will the Holeshot Concourse C14 Slip-on add performance, it will also remove nearly 14 lbs of unwanted wieght. This equals free horsepower and improved handling. The C14 slip-on can be installed without any re-tuning or mapping and pick up performance, but for the smoothest power curve with the most horespower and torque gains a Dynojet power commander should be installed with Dales custom map. The hose leading from the air box to the smog valve should also be plugged to help eliminate decel popping. Dale includes the proper size rubber plug with your PC-3 purchase.
We also offer a optional heat shield for riders that have a large foot to prevent your heel from contacting the elbow pipe. Dale recommends trying it first without and only purchase it if needed.
Running the Dynojet PC-3 with Dales custom map, you can expect a 6 to 8 hp gain and 6 to 8 ft-lbs of mid range grunt click here to view dyno chart
Holeshot Perfomance offers the C14 Power Commander with Dales custom map pre loaded to make it literally a plug and play installation.
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems and our polishes should also be used. See Below.
| Holeshot Concours C14 Slip-On | ||
| Description | Part No. | Price |
| 17" Polished Comp 2 | C14-SOP-17C2 | $394.00 |
| 17" Black Comp 2 | C14-SOB-17C2 | $419.00 |
| 17" Polished Street | C14-SOP-17S | $394.00 |
| 17 " Black Street | C14-SOB-17S | $419.00 |
| Holeshot logo plate (optional) | EX-NP | $5.00 |
| Heat Shield (optional) | 08-1651 | $22.00 |
| Dynojet Power Commander (with Dales map) | C14-PC3 | $309.00 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.