After several requests Dale has now come up with his latest Holeshot high pipe for the Yamaha 2003-2007 R6s. This is a performance slip-on that requires other flush mount type blinkers or under tail and removal of the rear foot pegs. Its super light weight, has unlimited ground clearance and is hand crafted in house. The Holeshot 14" high pipe muffler is available fully polished or in our satin black high temp powder shown, and can be ordered with our Comp 1 or Street core. Our Holeshot mufflers are known for having a very smooth tone with a healthy exhaust note that comes alive at wide open throttle. The polished 304 stainless end caps are hand tig welded and the rear now comes with our laser etched logo standard. The Holeshot logo side plate is now a added option only upon request. The mandrel bent mid pipe is satin black ceramic coated inside and out. This holds up very well and holds the heat in the pipe for a better flow rate. The custom hanger bracket is had fabricated in house by our fabricator Paul Mc Cain, then gloss black powder coated for a beautiful and tuff finish. All stainless clamps and hardware are included in the kit .
If you want to pick up some power, remove significant wieght and have a hand made pipe thats different from the rest try out the Holeshot R6s high pipe slip-on.
Click images to enlarge
Dale prefers the TFI tuning box over more expensive and complicated methods of tuning electronic fuel injection. The TFI does not require re-mapping of the EFI. It is a simple but precise tuning box that can add fuel in the low, mid and top end rpm range. The R6s TFI comes with base settings that will be close for our high pipe slip-on. It is easy to fine tune and a dyno is not needed to do so.
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems. See Below.
|
Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge |
|
Polished muffler with optional Holeshot logo plate Click the image to enlarge |
| 03-07 R6s Holeshot High Pipe Slip-Ons | ||
| Polished Comp 1 | Part No. R6S-SOHP-14C | $ 399.00 |
| Black Comp 1 | Part No. R6S-SOHB-14C | $419.00 |
| Polished Street | Part No. R6S-SOHP-14S | $ 399.00 |
| Black Street | Part No. R6S-SOHB-14S | $ 419.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
| R6s TFI tuning box | Part No. 2024ST | $255.95 |
.jpg)
|
Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in none high temp applications as well. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. |
| Valco All-In-One High Temp Silicone | |
| Part No. V-HTS | $7.50 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. It will keep your new
Holeshot Slip-on or complete system looking new
forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $9.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.