Holeshot Muffler Billet DB Killer Kit

Click image to enlarge
Dale's Holeshot Billet machined billet db killer not only looks trick, it also really works. Testing has shown a 3 to 5 db reduction when installed in your Holeshot muffler. This is intended as a option for the rider that may want to tone your Holeshot slip-on or full  system down a bit or when you take a long ride. The kit comes with every thing needed for the home tuner to install the db killer, using a hand drill and drum sander. The db killer will only fit Holeshot mufflers.


Click images to enlarge
[THUMB]accessories/db_killer08.jpg[/THUMB] [THUMB]accessories/db_killer03.jpg[/THUMB] [THUMB]accessories/db_killer04.jpg[/THUMB] [THUMB]accessories/db_killer05.jpg[/THUMB] [THUMB]accessories/db_killer02.jpg[/THUMB] [THUMB]accessories/dbkiller_tool4.JPG[/THUMB]
Note! You will need to measure the bead width on your turn down tip to determine which db killer kit you need to order. What we call the 3/16" tip bead is 5.65 to 5.70 mm wide, and the 1/4" tip bead is 6.85 to 6.95 mm wide. This will make it easier for you to be sure on which kit to order.
The 1/4 inch bead width uses the DBK-SK kit
Click here to see DBK-SK photo installation page

Click image to enlarge
The 3/16 inch bead width uses the DBK-UK kit
Click here to see DBK-UK photo installation page

Click image to enlarge
DB Killer Install / Removal Tool
Click image to see tool page

Click here to read costumer testimonials

Click here to view DB Killer video sound clip installed in DL-1000 Holeshot Exhaust

Note! If you have a dual muffler system be sure to order two db killers.

Holeshot Muffler Billet DB Killer Kit
Description Part No. Price
DB Killer DBK-SK
$31.95 ea.
DB Killer DBK-UK
$31.95 ea.
Prices subject to change without notice
[INCLUDE]templates/disclaimer.inc[/INCLUDE]