Holeshot Performance Cylinder Head Porting Service
Knowledge through years of experience
Click image to enlarge
Dale has now teamed up with porting expert and good friend Gary Dye, to once again offer our customers quality cylinder head porting. Dale & Gary are both on the same page when it comes to port shape, size and what should be done for different street motor applications. One thing you do not want is some guy getting a hold of your cylinder head, over porting it or doing shoddy valve seat work. This will not make power and wont last very many miles in the real world out on the road.
Dale & Gary have over 45 years total combined experience building high performance engines, porting cylinder heads, and Dale's racing experience speaks for itself. Gary has spent countless hours on the flow bench with 2, 4 & 5 valve heads and knows what works to make a good spread of power across the board. All 3 angle valve jobs are done on a precise Serdi machine, never hand cut. The turn around time for a full street port head service is normally 2 to 4 weeks once we receive cylinder head, depending on parts needed and other factors involved unless something is back ordered.
We offer a fully ported street head combination that includes a 3 angle valve job as well as matching the intake manifolds, de- carbon ,disassemble and reassemble. In some cases surfacing is also recommended, and new valve seals are mandatory.These and any other parts that may be needed will be an extra charge. All we ask is that you clean the head thoroughly as well as the gasket surfaces. Dale can go over this with you before sending us your head.
Gary will pull your head apart and do a full inspection first, then Dale will contact you to go over the overall condition, parts needed and what you can expect before any further work is started.
Please note! We also offer a budget minded cylinder head rebuild, that includes 3 angle Serdi valve job, matching intake manifolds, and bowl porting only. This service is priced upon request depending on what type of cylinder head you have.
Late model singles and twins are priced upon request
Call Dale today and he will be glad to answer any questions you may have about our Holeshot port work and cylinder head service
|Holeshot Performance Cylinder Head Porting Service Pricing
|2 Valve head full street port
|4 Valve head full street port
|5 Valve head full street port
Prices subject to change without notice
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
Copyright (c) 1998-2013. All rights reserved.