Holeshot Performance Products, Inc.

Dales Adjustable Bandit struts are an easy bolt on. These will raise or lower the 1200s about 1.25+" or 600s about 2.0+".

Raising the back will quicken up the steering a bit for the canyon carver plus add needed ground clearance. Lowering the back makes it more flat footed for shorter rider and also makes for much harder drag strip type launches if you're a weekend warrior at your local track.

These can be adjusted in minutes by removing the lower mounting bolt only. They are precision laser cut from 1018 steel so strength is not an issue. The super tough finish is a beautiful laser black powder coat with a slight metallic silver added.

Note: The Holeshot Struts will only lower the 2000+ Bandit 600s and will not raise them.

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Holeshot Bandit adjustable struts
Part No. B-AS	$64.95 per set