Holeshot Performance, Inc.

2001+ B-12 Stage 1 Modified Jet Kit

After two months of Dyno and road testing Dale's new Stage 1 Mod kit is now ready for the late model B-12s.

This economical and simple to tune jet kit is designed for modifying the air box per Dale's instructions to increased air flow. The end results are butter smooth power delivery, unreal throttle response and better fuel mileage. You can expect a 10 to 13 HP gain and up to 80 ft-lbs of arm stretching torque when run in conjunction with the Holeshot Slip-on and even more with the Holeshot stepped header.

The Stage 1 Mod kit includes 3 sets of original Mikuni main jets, pilot jets, mill spec stainless needle shims, stainless allen bolts for the float bowls and Dales timing advancer with gasket for the engine cover.
Its a proven fact the advancer adds throttle response and increases fuel economy on any B-12. You can also still run 87 or 89 octane fuel without a problem.

Dale's step by step instructions make it very easy for the home tuner to install and fine tune the kit and as always, Dale is just a phone call away.

Note: We do not recommend any aftermarket air filter element with this jet kit. Extensive testing has found that the original Suzuki filter outperforms other high flow units in the new style air box.

Click here for dyno charts.

2001+ B-12 Stage 1 Modified Jet Kit
Part No. B1201-JK1-M $132.00 ea.

Our extensive testing has found that the original Suzuki air filter element outperforms other high flow units in the new style air box of the 2000+ Bandit 600 and the 2001+ Bandit 1200.

We recommend using only this filter with the Holeshot Performance jet kits. We now have them in stock for our customers.

Note: Fits 2000+ Bandit 600 and 2001+ Bandit 1200 only.

Original Suzuki air filter element
Part No. 13780-31F00 $34.00 ea.

Holeshot Float gauge

Click image to enlarge 		Adjusting your floats to the proper level is a very critical part of setting up your new jet kit. This high quality float gauge is what it takes to do it right. This gauge works on all types of carbs.
Holeshot Float gauge
Part No. 35-9123 $42.95

All orders plus shipping - Prices subject to change without notice

-----

[Back]

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Copyright (c) 1998-2010. All rights reserved.