Holeshot Performance Products, Inc.

Bandit 1200 Stage 1 Modified Jet Kit
for 1996 through 2000 models only

Dale designed the Holeshot® Stage 1 Modified Jet Kit to retain the stock air box, and calibrated it for an additional 2" intake hole.

You can expect up to a 4 HP gain, more torque and a much smoother running engine. It will also make it less cold blooded on start-ups.

This kit is designed to be run with our slip-on, full header system or others.

Note: Our 5 degree timing advancer is also recommended.

Our Exclusive Stage 1 Mod Kit Includes:

K&N high flow air filter
3 sets of original Mikuni main jets
2 sets of original Mikuni pilot jets
Holeshot® aluminum hard anodized adjustable needles
Stainless allen bolts to replace the float bowl screws
Complete installation and tuning tip instructions

Bandit 1200 Stage 1 Modified Jet Kit
Part No. B12-JK1M	$182.00
also available without the filter (if you already own one)
Part No. B-12JK1M-NF	$156.00

Note: We do not sell our needles separately

Our +5° timing advancer is highly recommended to complete the package when running a jet kit and a high flow exhaust system.

Better throttle response, more horsepower and torque can be expected throughout the rpm range. Detonation is not a problem with pump gas.

The Holeshot Advancer bolts on in minutes replacing the stock unit.

Now includes cover gasket.

Holeshot B-12/B-6 Timing Advancer
Part No. B-RT	$53.00

K&N Recharger Air Filter Service Kit

click image to enlarge

The K&N Recharger cleaning kit includes the 12 oz bottle of air filter cleaner and the 6.5 oz air filter oil spray. This is the best way to go for cleaning and maintaining your K&N air filters. Doing so will make them last and last, keep the carbs or injectors cleaner and offer the best performance.

K&N Recharger Air Filter Service Kit
Part No. 99-5000	$19.95

Holeshot Float gauge

Click image to enlarge

Adjusting your floats to the proper level is a very critical part of setting up your new jet kit. This high quality float gauge is what it takes to do it right. This gauge works on all types of carbs.

Holeshot Float gauge
Part No. 35-9123	$42.95

All orders plus shipping - Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.