Holeshot Performance, Inc.

2000+ B-6 Stage 1 Modified Jet Kit

Dale's 2000+ B-6 Stage 1 Modified Jet Kit includes everything you need to wake up your late model Bandit 600 at a very reasonable cost.

This kit was designed with the home tuner in mind. It is easy to install and dial in. It will improve cold start-ups and warmup time and add mid-range and top-end power. It is primarily made to be run in conjunction with a slip-on exhaust or our full system but can also be tuned for the stock muffler. Stainless carb shims, two sets of main jets, our timing advancer and cover gasket are included with the kit, as well as Dale's detailed instructions and tuning tips.

And as always, Dale is only a phone call away and will be glad to help if you need a hand.

An original Suzuki air filter in perfect condition is recommended.

2000+ B-6 Stage 1 Modified Jet Kit
Part No. B600-JK1 $99.00 ea.

Our extensive testing has found that the original Suzuki air filter element outperforms other high flow units in the new style air box of the 2000+ Bandit 600 and the 2001+ Bandit 1200.

We recommend using only this filter with the Holeshot Performance jet kits. We now have them in stock for our customers.

Note: Fits 2000+ Bandit 600 and 2001+ Bandit 1200 only.

Original Suzuki air filter element
Part No. 13780-31F00 $34.00 ea.

Holeshot Float gauge

Click image to enlarge
Adjusting your floats to the proper level is a very critical part of setting up your new jet kit. This high quality float gauge is what it takes to do it right. This gauge works on all types of carbs.
Holeshot Float gauge
Part No. 35-9123 $42.95

All orders plus shipping - Prices subject to change without notice

-----

[Back]

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Copyright (c) 1998-2010. All rights reserved.