Holeshot Performance, Inc.

Holeshot Bandit 1200
Factory drop-in Camshafts

These factory Suzuki camshafts really wake up all 1200 Bandits without sacrificing any reliability.

You can choose just the intake cam for a 4 to 6 horsepower gain with only a very minimal change in the midrange power band or install them as a set and pick up another 3 to 4 HP on the top end.

Note: A very minimal mid range loss of power can be expected when running both cams but they offer a very smooth power delivery.

The camshafts directly bolt in just like the original Bandit cams, do not require degreeing and you are able to use the stock cam sprockets.

Sold separately or as a set.

Holeshot Bandit 1200 Factory drop-in Cams
B-12 Intake cam Part No. B12C-IN $229.00
B-12 Exhaust cam Part No. B12C-EX $229.00

Suzuki Valve adjustment tool

Click image to enlarge 		This tool is a must have for adjusting your own valves. It's made specifically to fit the Bandit & Katana adjuster screws to make the job much easier. This tool is all steel with knurled knob.
Suzuki Valve adjustment tool
Part No. B-VAT $12.95

All orders plus shipping - Prices subject to change without notice

-----

[Back]

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Copyright (c) 1998-2010. All rights reserved.