Holeshot Performance, Inc.

Holeshot® Bandit
Sport Rack and Back rest

Holeshot Sport Rack

The Holeshot Bandit Sport Rack is more than just a rack, its a real work of art. Each tube is bent by hand in our tubing bender, then end milled for a perfect fit. The laser cut side plates and finished tubing is then placed in our welding fixture. Our expert in house fabricator Paul McCain then beautifully tig welds it all together. Its then finished in good looking and super tough gloss black powder coat.

The Holeshot Sport Rack includes grade 8.8 flange bolts and is easily installed or removed in 10 to 15 minutes. It measures 8.5" inches wide x 10" inches long. The rack can easily carry 15 to 20 lbs.

Fits 2000+ Bandit 600 and 2001+ Bandit 1200 only.

Note: The rack is also available as a set with our back rest. See below for details.

Click images to enlarge

Holeshot® Bandit Sport Rack
Part No. B612-SR $189.00

Holeshot Back Rest

The Holeshot Bandit Back Rest bolts on in minutes and can be used with or without our Sport Rack.It really makes your passenger feel comfy and secure and you will no longer have to worry about them falling off when you want to twist the throttle.

Hardware and stainless spacer plates are provided for easy install with or without the Sport Rack.

Fits 2000+ Bandit 600 and 2001+ Bandit 1200 only.

Note: The original grab rail needs to be removed.

Click images to enlarge

Holeshot® Bandit Back rest
Part No. B612-BR $159.00

Holeshot Sport rack & Back rest set

Save money and buy the Sport rack and Back rest as a set. The rack and back rest come with all necessary hardware and bolt on in minutes.

Fits 2000+ Bandit 600 and 2001+ Bandit 1200 only.

Click images to enlarge

Sport Rack & Back rest set
Part No. B612-RRS $333.00

All orders plus shipping - Prices subject to change without notice

-----

[Back]

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Copyright (c) 1998-2008. All rights reserved.