Holeshot Performance Products, Inc.

Dale Walker and Sean Griffin of www.maximum-suzuki.com put their heads together and designed the new, super clean Holeshot Damper kit for the 2001-05 naked and S model Bandit 1200s.

The new B-12 will really shake its head when the horse power is applied. The Holeshot steering damper is the complete cure for this problem. The damper is a high quality unit made in Japan, with 7 click adjustments from soft to heavy.

All the mounting components are machined from air craft grade aluminum, then black anodized to protect them from the elements and to give them a very sano look. Stainless steel mounting hardware is included, as well as easy to follow installation and adjustment instructions. It is a direct bolt on without any modifications to the bike whatsoever.

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

	The Holeshot Steering Damper Kit has been exclusively designed for the late model (2001-05) Bandit 1200. The picture on the left shows the damper installed on Dale's naked 1200. Click on the images to enlarge!
	The rear damper frame bracket is neatly tucked behind the frame tube on both models. All aluminum components are black anodized to protect them from the elements and to offer very clean look.
	Note: The 'S'-Model uses a custom two piece fork clamp that can be installable without removing the front end or sliding down the fork tubes.
	The 'S'-model Holeshot Damper Kit is completely hidden. Shown here on Sean's 1200. This is one of the cleanest installations you have ever see.

Holeshot Steering Damper Kit
2001-05 Naked B-12	Part No. B12-SDK	$339.00 ea.
2001-05 Faired B-12 'S'	Part No. B12S-SDK	$339.00 ea.