Dale's new Holeshot High Pipe slip-on is not for the faint at heart.
It is a serious piece of art for the purest Bandit owner only.
It requires removing the rear bungee cord rails
and stock rear turn indicators (picture below show our optional
flush mount blinkers - not included).
The grab handles are also removed, our Grab Rail Removal Kit is
included with the slip-on.
Note: The center stand can now be retained with the
high pipe by installing the optional Holeshot center stand stop.
It really snorts when the revs are up with the new Holeshot
14" inch comp muffler. If you want a bad ass slip-on this is it.
It includes our high flow elbow high pipe that is Ceramic coated inside and
out to increase flow, hold in the heat, keep it looking great and incudes with a 1 year coating warranty against surface rust. Our new exclusive aluminum/stainless Holeshot 14 inch comp muffler
completes the super clean look and big performance gain. All stainless clamps
and hidden mounting bracket are included.
At this time. Dales new high pipe slip-on is available separately or also
with the Holeshot stepped header as a complete system. Jetting is not mandatory,
but highly recommended and Dale has several kits to choose from with his
stage 1 mod or the stage 2 kit. The holeshot timing advancer completes the
package for better response and mid range.
With the new high pipe you can expect a 16 to 22 horse power gain depending on
which jetting choice you go with. You will also enjoy 10 to 12 more foot pounds of
arm stretching grunt (these numbers apply to the 1200). The 600 will gain about
3 to 5 hp on top with a 5 to 7 hp gain in the mid range.
The complete slip-on removes about 7 lbs compared to the stock can!
Note: The Bandit 600 Kit does not include rear foot peg spacers
and requires trimming off rear foot peg bracket from frame.
|
|
| Dale's new high pipe Holeshot slip-on includes his trick grab rail removal kit. |
The new Flush Mount Blinkers really finish up the package. Part no. 122-9735 - $22.00 pair |
|
|
| Now available in fully polished or a powder satin black canister with polished stainless end caps. | The rear foot peg can be retained or removed. All hardware to run them or not is included. |
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems. See Below.
|
Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge |
|
Polished muffler with optional Holeshot logo plate Click the image to enlarge |
 |
Our latest super clean, laser etched Holeshot Performance muffler end cap. The silver and black Holeshot logo plate will not be on the muffler unless requested. The cost to have the logo plate installed is $5.00 per muffler. Click the image to enlarge |
| Holeshot 1997-2000 Bandit 1200 High Pipe Slip-On Comp 1 | ||
| polished | Part No. B12-SOH | $414.00 |
| powder black | Part No. B12-SOHB | $434.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
| Holeshot 1997-2000 Bandit 1200 High Pipe Slip-On Comp 2 | ||
| polished | Part No. B12-SOH2 | $424.00 |
| powder black | Part No. B12-SOHB2 | $444.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
| Holeshot 1996-1999 Bandit 600 High Pipe Slip-On Comp 1 | ||
| polished | Part No. B6-SOH | $414.00 |
| powder black | Part No. B6-SOHB | $434.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
| Holeshot 1996-1999 Bandit 600 High Pipe Slip-On Comp 2 | ||
| polished | Part No. B6-SOH2 | $424.00 |
| powder black | Part No. B6-SOHB2 | $444.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
 
|
Dales center stand stop allows you to install your center stand with your new Holeshot High Pipe if desired. The stop is precision laser cut from 304 stainless steel then the bumper tab is tig welded into place. It bolts up to the left side of the frame using the center stand pivot bolt. A longer bolt is provided with the kit. Note: This is a special hand made item is only available to customers that have purchased a Holeshot exhaust system.
Click images to enlarge
|
| Holeshot Stainless Steel Center Stand Stop | |
| Part No. B-CSS | $28.95 |
|
Permatex Ultra Copper high temp silicone is the best product for exhaust system slip fits during installation. It's the most advanced sealer available and resistant to extreme temperatures up to 700 degrees. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. |
| Permatex Ultra Copper High Temp Silicone | |
| Part No. P-UCS | $7.50 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. It will keep your new
Holeshot Slip-on or complete system looking new
forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $9.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.