Dale's high pipe for the
late model B-6 and B-12 is ready to rock. If you are in for that trick
look and healthy growl then this is the pipe for you. It is
designed as a slip-on or you can also add our full stepped
header.
You can expect the same awesome power output as our standard
comp style pipe when run in conjunction with one of Dales
jetting kits and timing advancer.
The 2001+ B-12 Holeshot high pipe slip on comes with a laser
cut black powder coated hanger bracket and mounting hardware to
retain the rear foot pegs or to remove them.
The high flow elbow pipe is ceramic coated inside and out for good
looks and comes with a 1 year warranty against rust.
The B-12 Holeshot 14" comp muffler is hand crafted in house from
stainless steel and T6 aluminum and is available fully polished
or in our new powder black series. This is a high performance
pipe and is fairly loud when your on it hard.
Note: The rear fender must be
trimmed and you have a choice of using our cat eye blinkers and
bracket kit or our the flush mount type.
The center stand can now be retained with the high pipe by installing
the optional Holeshot center stand stop.
Click here to
see Dales 2001+ B-12 rear fender trimming tips and blinker
options.
| Click here for Dyno charts |
We now also offer a Holeshot High Pipe for the 2000+ Bandit 600. It is the same unit that fits the late model B-12, other than it utilizes a custom laser cut muffler bracket made to fit the late 600 perfectly. Please note that the rear foot pegs can be retained with supplied machined spacers and longer allen head mounting bolts, or you can remove the rear pegs as shown.The 600 high pipe comes with the high flow street core 14" mufflers.
 |
The picture on the left shows the high pipe mounted on a 2000+ Bandit 600.
Click on the images to enlarge!
|
 |
Close up of included 2000+ Bandit 600 laser cut gloss black powder coated hanger bracket. Note, foot peg bracket can be retained by utilizing provided aluminum machined spacers and mounting bolts. |
 |
The Holeshot high pipe slip-on is a real work of art following the lines of the bike. |
 |
The picture on the left shows the high pipe on Dale's black 2001 Bandit 1200 without the rear foot pegs installed for that clean look. |
 |
Close up of included Bandit 1200 laser cut gloss black powder coated hanger bracket and machined aluminum spacers to retain rear foot pegs. |
 |
The rear view offers a super clean, tucked in look. |
|
Our Holeshot high mount slip-on on a customers 2001 red Bandit 1200. |
|
Photo courtesy of Cliff Solylo of Burkburnett, TX. |
The Holeshot slip-ons are available in fully polished or a powder satin black canister with polished stainless end caps.
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems. See Below.
|
Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge |
|
Polished muffler with optional Holeshot logo plate Click the image to enlarge |
 |
Our latest super clean, laser etched Holeshot Performance muffler end cap. The silver and black Holeshot logo plate will not be on the muffler unless requested. The cost to have the logo plate installed is $5.00 per muffler. Click the image to enlarge |
| Holeshot 2001+ Bandit 1200 High Pipe Slip-On Comp 1 | ||
| polished | Part No. B1201-SOH | $424.00 |
| powder black | Part No. B1201-SOHB | $444.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
| Holeshot 2001+ Bandit 1200 High Pipe Slip-On Comp 2 | ||
| polished | Part No. B1201-SOH2 | $434.00 |
| powder black | Part No. B1201-SOHB2 | $454.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
| Holeshot 2000+ Bandit 600 High Pipe Slip-On | ||
| polished | Part No. B600+SOH | $424.00 |
| powder black | Part No. B600+SOHB | $444.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
 
|
Dales center stand stop allows you to install your center stand with your new Holeshot High Pipe if desired. The stop is precision laser cut from 304 stainless steel then the bumper tab is tig welded into place. It bolts up to the left side of the frame using the center stand pivot bolt. A longer bolt is provided with the kit. Note: This is a special hand made item is only available to customers that have purchased a Holeshot exhaust system.
Click images to enlarge
|
| Holeshot Stainless Steel Center Stand Stop | |
| Part No. B-CSS | $28.95 |
|
Permatex Ultra Copper high temp silicone is the best product for exhaust system slip fits during installation. It's the most advanced sealer available and resistant to extreme temperatures up to 700 degrees. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. |
| Permatex Ultra Copper High Temp Silicone | |
| Part No. P-UCS | $7.50 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. It will keep your new
Holeshot Slip-on or complete system looking new
forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $9.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.