After 6 months of testing the Holeshot stage two air box kit is now
ready for the late model B-12. Dale considers this new kit to be the best
of both worlds for the average street rider.
What he went after is the best overall low and mid range performance
that the Holeshot stage one air box kit delivers, while getting
close to the HP numbers on the top end of the Holeshot stage two kit,
which is mostly designed for the all out hot rodder, or someone
building up a motor.
You will really appreciate how this kit delivers smooth overall power even under full throttle load in the lower RPMs. The Holeshot Stage two air box kit retains the original late model air box but removes the entire back cover and the internal screen. The new black anodized computer machined 6061-T6 billet aluminum outer ring holds the high flow K&N air filter in the back which is completely open for maximum air flow for big power and torque gains. The filter is still well hidden under the seat and frame rails to protect it from the weather.
Dale's kit includes a high flow replacement K&N filter, machined 6061-T6 aluminum outer ring, special Holeshot hard anodized needles, e clips, stainless mill spec shims, three sets of original Mikuni main jets, Mikuni pilots jets and stainless float bowl allen bolts. Detailed installation instructions and tuning tips for the home tuner are also included. Dale is also only a phone call away if you need a hand with anything. This kit is compatible with all Holeshot slip-ons or full header system. Any aftermarket pipe will also work fine with it when set up properly.
Click here for before and after dyno results
Note: It is very important to install our +5 degree timing advancer with your new stage 2 air box kit. The fuel curve was calibrated with the advancer installed for the optimum results (Sold separately).
| Holeshot 2001+ Bandit 1200 Stage Two Air Box Jet Kit | |
| Part No. B1201-JK2BK | $278.00 |
 |
Our +5° timing advancer is highly
recommended to complete the package when running a jet kit
and a high flow exhaust system. Better throttle response, more horsepower and torque can be expected throughout the rpm range. Detonation is not a problem with pump gas. The Holeshot Advancer bolts on in minutes replacing the stock unit. Now includes cover gasket. |
| Holeshot B-12/B-6 Timing Advancer | |
| Part No. B-RT | $53.00 |
 click image to enlarge |
The K&N Recharger cleaning kit includes the 12 oz bottle of air filter cleaner and the 6.5 oz air filter oil spray. This is the best way to go for cleaning and maintaining your K&N air filters. Doing so will make them last and last, keep the carbs or injectors cleaner and offer the best performance. |
| K&N Recharger Air Filter Service Kit | |
| Part No. 99-5000 | $19.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2010. All rights reserved.