Holeshot Concours Slip-Ons

Dale spent several months dyno developing and road testing these beautiful new Concours Holeshot slip-ons. The complete set weighs in just a tad over 12 lbs. Your stock mufflers are 10.5 lbs each.
Quality of workmanship, performance gains and easy installation were the objectives for this design. We also felt it was important that the new Holeshot Slip-ons have a throaty, yet very mellow exhaust note for those long distance hauls. To say the least, Dale's very pleased with the results.

They look very sharp with or without the bags installed.

Both Holeshot mufflers follow a much cleaner line under the bags. They extend back further than the stockers and the beaded turn down tips help reduce noise levels, as well as keeping the exhaust soot off the bags.

New muffler brackets are laser cut, then powder coated gloss black for a very clean look and high durability.

	Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge The optional logo plate is sold seperatly, customer installs.
	Polished muffler with optional Holeshot logo plate Click the image to enlarge
	Our latest super clean, laser etched Holeshot Performance muffler end cap is now standard. Click the image to enlarge

Features include:

High heat, satin black powder coated elbow pipes blend in nicely with the stock header pipes.
Left elbow pipe includes welded, laser cut side and center stand brackets to locate original rubber stops.
Satin black powder coated, laser cut muffler bracket for good looks and long life.
Holeshot mufflers feature aluminum skins with spun stainless front and rear end caps, and turn down tips. All components are precision tig welded.
Throaty, yet mellow exhaust note for long distance traveling.
Complete with high quality stainless clamps and hardware.
A 2-4 horse power gain throughout the whole rpm band and more useable torque. Between 9000-10,000 rpm it made a full 7-10 hp gain. WOW!
Note: though jetting is not mandatory, these horse power gains were accomplished in conjunction with Dale's recommended Stage 1 Power Package Jet Kit. This is a very simple kit to install, which includes his +4 degree timing advancer and K&N air filter.
Dale does all his development and Dyno work in-house.

Click here for dyno numbers.

Note! You will need to order two Header Pipe Gaskets with your new Holeshot slip-ons.

Note! High Temp Silicone is required when installing our exhaust systems. See Below.

The Holeshot slip-ons are available in fully polished or a powder satin black canister with polished stainless end caps. Note! Now all our mufflers have the new laser etched Holeshot Performance muffler end cap.

Holeshot Concours Slip-Ons
Description	Part No.	Price
Concours Polished Slip-Ons	ZG-SO	$579.00
Concours Satin Black Slip-Ons	ZG-SO-B	$599.00
ZL-ZG header pipe gaskets	K-HPG	$8.50
Holeshot logo plate (optional)	EX-NP	$5.00

Valco All-In-One High Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in none high temp applications as well. This product is a necessity to use if your installing our Holeshot slip-on or complete header system.

Valco All-In-One High Temp Silicone
Part No. V-HTS	$7.50

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Note: Magic Mix polish should not be used on our black header and muffler coatings.

Magic Mix Metal Polish (8 oz. bottle)
Part No. MM-P	$8.95

Magic mix speed wax, to maintain our satin black mufflers and ceramic black headers.

Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings.

Click here to see all our detailing products.

Magic Mix Speed Wax (16 oz. bottle)
Part No. MM-SW	$10.95

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.