Dale's new DL-1000 V-Strom handlebar riser kit is for the rider that puts on a lot of miles or just wants a slightly more upright riding position. This really helps with the old shoulders, lower back and neck pain. The kit includes CNC machined 6061-T6 air craft aluminum spacers which move the handlebars up nearly 1 3/8 inches, and match the diameter of the stock lower bar clamps for a clean look. The bars can easily be rotated front to back to get them just to your liking. The original cables and hoses work fine with some minor adjustments and grade 8 bolts with nylock nuts are also included. Installation is very easy and straight-forward. Another neat feature about this kit is that they almost look factory when installed since we also paint the risers to nearly match the stock parts.
Click here for installation photo tips of the Bar Riser Kit.
| Holeshot DL-1000 V Strom Bar Riser Kit | ||
| Part No. DL- BRK | $64.95 | |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.