Holeshot Performance Products, Inc.

How to plug Pair valve to eliminate decel popping.
Note! In most cases this is only necessary when you install slip-ons or aftermarket exhaust system.

Click the photos below for a larger view.

Remove hose from air box that leads to PAIR valve, cap off both open nipples with vacuum cap and nylon ties. These are available at most auto parts stores. Your other option is to internally plug the hose leading from the airbox to the pair valve. This can easily be done with a solid tapered rubber plug.

Note: Feel free to call Dale, after 3:30 pacific time M-Th if you have any questions. (775)-463-5394

All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.