DL 650 V-Strom 14 Tooth Counter Shaft Sprocket

Click image to enlarge

The DL-650 V Strom is a bit to high geared from the factory. This causes the bike to shudder or lug under part and full throttle load. Dale recommends dropping one tooth off the front to the 14 tooth counter shaft sprocket. Your bike will be much smoother and have better acceleration as well as more mid range torque. The bike is still great out on the open road at 70 to 80 mph cruising speeds. The 14 tooth sprocket is top quality and made in the USA. It is a simple bolt on and the original chain works fine with it. Combine this gearing change with Dale's TFI tuning box tune up, maybe our slip-on and you will think you have a whole new motorcycle. So if you want to make your Little V-Strom have more pick up we highly recommend this simple up-date.

DL 650 V-Strom 14 Tooth Counter Shaft Sprocket
Part No. 572-14	$24.00 ea.

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.