DL-1000/650 V-Strom Holeshot Comfort Bars
Proudly made in American

Stock Bars vrs Comfort Bars
Click image to enlarge
Dale tested quite a few of the bar risers and bar backs out there, and just was not happy with the out come or the erector set look of all that stuff bolted together. Instead he thought out of the box and got to work on testing the new Holeshot DL-1000 / 650 V-Strom Comfort Handle Bars. After making 3 prototype sets with different bends and rises the finished product is just what the doctor ordered. Dale feels the stock bend is not the real issue, and that mostly they needed to be closer to the rider and only slightly higher. The Holeshot Comfort bars are approximately 3/4" inch higher, 1.5" to 2.0" inch closer to the rider, and 30 " inches wide. This will depend on how you have them adjusted of course. They are CNC bent and made from DOM American 7/8" inch steel tubing, then powder coated in a 60 % gloss satin black finish. The ID will fit the original bar ends, after market or the Throttlemeister. Since different year models use different switch assemblies , the customer must drill the two holes for the switches once you have the bars installed. The stock brake line, cables, and wires looms reach but some minor re-routing is required. If you have a hard time reaching your stock bars or your shoulders start killing you when you ride, then consider giving the new V-Strom Holeshot comfort bars a try.

The Holeshot Comfort Bars fit every year model DL 650 & 1000, Please note! These are a non returnable item

Click images to enlarge
DL-1000/650 V-Strom Holeshot Comfort Bars 
Description Part No. Price
Comfort Bars DL-HCB
$97.00

Superbike Pro Gel Grips



 The Superbike Pro Gel Grips feature a gel system design with an exclusive dual formula for greater comfort and much less vibrations, to help eliminate numbing of the hands. The Street grips are 120 mm long with open ends to fit with stock or after market bar end weights.These are really nice grips that make a world of difference, and are still not too large in diameter like many other comfort type grips on the market. They come in a gray and black or all black as shown.

Note: Some throttle sleeves may have a plastic ring attached that will need to be trimmed off to install new grips. Grips should always be glued in place.
Superbike Gel Pro Grips
Description Part No. Price
Gray & Black 17-7938
$13.99 per set
All Black 17-7932
$13.99 per set

Scott Grip Glue

Scott grip stick glue is what you need to install your new Pro Gel grips. It has a 15 to 25 second set up time, and cures in 5 minutes so your ready to ride when your done. This tube will glue one pair of grips . Please note ! This product can only be shipped within the USA, not overseas.
Scott Grip Glue
Part No. 176130-1      $2.50
Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

Copyright (c) 1998-2012. All rights reserved.