Fits through 2006 model only
100% hand made by american craftsmen. .
Dale's DL 650 V-Strom Holeshot Slip-on delivers the performance and quality you expect from Holeshot Performance. It offers about a 50% weight reduction compared to stock and is hand crafted from high grade 304 stainless steel and 6061-T6 aircraft aluminum components. This simple but clean design requires cutting the muffler tube in an easy to get to location behind the lower exhaust heat shield, and can be installed in about 20 to 30 minutes. This design allowed us to keep the cost down compared to building a hand made full system, without sacrificing performance and keeping more of a factory look. As far as sound goes, it has a very subtle exhaust note at light throttle or while just cruising down the interstate, but will come alive under full throttle load with that great V-Twin growl. The polished elbow pipe and clamps are also made of 304 stainless for long life and good looks.
Most DL-650 /1000s run pretty well when adding a slip-on if you stick with the original air filter, but if you want to really smooth out the power curve, ad more mid range and top end power, along with very good fuel mileage, Dale highly recommends the TFI tuning box. He has been TFI tuning the DLs for two years now with great results. This is a much easier way to dial in your EFI than any other method and dyno tuning and re-mapping are not necessary. Click here To view the TFI tuning box info.
The DL 650 V-Strom Holeshot slip-on is available in fully polished or with the powder black canister with polished stainless end caps. The elbow pipe and clamps are also made of 304 stainless for a long life and good high quality looks.
Click here for a helpful picture of where to cut header pipe
Click here for helpful pictures of trimmed lower heat shield
|
Our latest super clean, laser etched Holeshot Performance muffler end cap. Note! The silver and black Holeshot logo plate will not be on the muffler unless requested. It is now an option, which can be installed for an additional $5.00 per muffler. (Click image to enlarge) |
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems. See Below.
|
Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge |
|
Polished muffler with optional Holeshot logo plate Click the image to enlarge |
 |
Cycle Imports of Santa Cruz is now the official Holeshot Performance central and northern Ca authorized tuning and installation center. Call the owner Richard Oliveira today if you need any of our parts installed, or just need a shop you can trust to do very good work on your motorcycle with that personal touch. Click here for more info and be sure the let Richard know Dale Walker sent you From Holeshot. |
Click here to see the New Holeshot License Plate Frame.
| Suzuki DL-650 V-Strom Holeshot Slip-on through 2006 model | ||
| polished | Part No. DL650-SO | $374.00 |
| powder black | Part No. DL650-SOB | $389.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
|
Permatex Ultra Copper high temp silicone is the best product for exhaust system slip fits during installation. It's the most advanced sealer available and resistant to extreme temperatures up to 700 degrees. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. |
| Permatex Ultra Copper High Temp Silicone | |
| Part No. P-UCS | $7.50 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. It will keep your new
Holeshot Slip-on or complete system looking new
forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $9.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.