Holeshot ZL 900/1000 Slip-Ons

The Holeshot Holeshot Slip-ons remove the entire canister box and original mufflers. They easily bolt up to the stock location, drop 13 lbs. of unwanted weight and sound nice and throaty without being too noisy. And boy do they make it run.

Other features include:

Polished aluminum/stainless Holeshot Mufflers are made in-house
Includes stainless clamps and hardware
Polished stainless end caps without tips for that authentic muscle bike look
7 to 9 more hp in the midrange and about 6 more at peak rpm will make your ZL come alive. At 10K it made an unreal 10 hp improvement
More usable torque
Dyno aided developed by Dale himself

Note: The above horsepower and torque gains were made with the Holeshot Slip-ons and our Stage 1 Power package on the stock ZL 1000 pictured. Dale's jet kits are highly recommended to complete the package.

Click here for Dyno charts

Note! High Temp Silicone is required when installing our exhaust systems. See Below.

	Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge The optional logo plate is sold seperatly, customer installs.
	Our latest super clean, laser etched Holeshot Performance muffler end cap is now standard. Click the image to enlarge

Note! You will need to order two Header Pipe Gaskets with your new Holeshot slip-ons.

The Holeshot slip-ons are available in fully polished or a powder satin black canister with polished stainless end caps.
Note: Now all our mufflers have the new laser etched Holeshot Performance muffler end cap.

Holeshot ZL 900/1000 Slip-Ons
Description	Part No.	Price
ZL 900/1000 Polished Slip-Ons	ZL-EX	$579.00
ZL 900/1000 Satin Black Slip-Ons	ZL-EXB	$579.00
ZL-ZG header pipe gaskets	K-HPG	$8.50
Holeshot logo plate (optional)	EX-NP	$5.00

Valco All-In-One High Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one of the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in non high temp applications as well. This product is a necessity to use if you are installing our Holeshot slip-on or complete header system.

Valco All-In-One High Temp Silicone
Part No. V-HTS	$7.50

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Note: Magic Mix polish should not be used on our black header and muffler coatings.

Magic Mix Metal Polish (8 oz. bottle)
Part No. MM-P	$8.95

Magic mix speed wax, to maintain our satin black mufflers and ceramic black headers.

Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings.

Click here to see all our detailing products.

Magic Mix Speed Wax (16 oz. bottle)
Part No. MM-SW	$10.95

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.