Holeshot Performance Products, Inc.

2006 Bandit 1200 High Performance Brake Pads by
Ferodo

Ferodo Limited U.K. is the world's largest friction materials manufacturer. Ferodo's record in motor racing is second to none with more world and national championships than all others combined. All Ferodo Brake pads are designed for maximum braking performance with minimal brake rotor wear.

Dale's choice is the sinter series for the front

This is a great high performance street and occasional track day pad

PRODUCT FEATURES:

Copper coated backplate allows for highest mechanical bonding possible between friction material and backplate, as well as reduced corrosion
Highest coefficient of friction (HH+) in a road friction material
Advanced composition friction material creates much less brake drag (compared to other HH brand pads) allowing for reduced thermal build up and longer life
20% less rotor wear than competitive sintered compounds
Minimal bedding-in of material
Performs equally well in wet and dry conditions

Dale's choice is the platinum series for the rear

Not as much bite initial bite as the sintered compound so the platinum is a better choice for the rear

PRODUCT FEATURES:

Manufactured with Original Equipment homologated process, along with a unique vulcanization process that provides superior bonding to the specially prepared backplate
Alloy coated backplate reduces corrosion and eliminates piston sticking to heated paint
Highest coefficient of friction in an organic road material
Compound transmits highest level of modulation of any compound
Compound performs well in wet and dry conditions

For additional stopping power check out our braided brake line kits.

2006 Bandit 1200 Ferodo brake pads
Sintered Front	Part No. FDB-574-ST	$38.95 per disc
Platinum Rear	Part No. FDB-754-P	$32.95 per disc

All orders plus shipping - Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.