The GSX-R Holeshot high pipe slip-on is available for the 2004 + 600 / 750 and the 2001-2003 750 models. Dale's hand crafted system is a real work of art. It includes a polished 304 stainless mid pipe and hardware, laser cut powder coated hanger bracket and either the 14" Holeshot Comp 1 or Comp 2 muffler assembly. Holeshot mufflers are are assembled in house from 304 stainless and 6061-T6 air craft aluminum, and are available in a fully polished finish or in our powder satin black canister with polished stainless end caps. Machined spacers and hardware are also included to either run or not run the rear foot pegs. Our Rear Fender Eliminator kit (shown in the photos) for the 2004 + 600 / 750 must be used to install the Holeshot high pipe, Click here for info. Note! We do not make a Rear Fender Eliminator kit for the 2001-2003 750 so we recommend a under tail kit for that model.
Note! The stock header pipe must be
cut to install the high pipe, Click here
to see where to cut pipe tip photo.
The Holeshot GSX-R mufflers are available in 2 different core designs:
|
New for 2006 is the super clean, laser etched Holeshot Performance muffler end cap. Note! The silver and black Holeshot logo plate will not be on the muffler unless requested. It is now an option, which can be installed for an additional $5.00 per muffler. (Click image to enlarge) |
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems. See Below.
|
Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge |
|
Polished muffler with optional Holeshot logo plate Click the image to enlarge |
Holeshot Performance TM sponsored AFM road racer Rick William's GSX-R 750.
| GSX-R 600/750 Holeshot High Pipe Slip-on | |||
| 2004 + GSX-R 600 / 750 | |||
| polished 14" | Comp 1 | Part No. GSXR-SOH-14CP | $379.00 |
| black 14" | Comp 1 | Part No. GSXR-SOH-14CB | $404.00 |
| polished 14" | Comp 2 | Part No. GSXR-SOH-14C2P | $404.00 |
| black 14" | Comp 2 | Part No. GSXR-SOH-14C2B | $429.00 |
| 2001-2003 GSX-R 750 | |||
| polished 14" | Comp 1 | Part No. GSXR01-SOH-14CP | $379.00 |
| black 14" | Comp 1 | Part No. GSXR01-SOH-14CB | $404.00 |
| polished 14" | Comp 2 | Part No. GSXR01-SOH-14C2P | $404.00 |
| black 14" | Comp 2 | Part No. GSXR01-SOH-14C2B | $429.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 | |
|
Permatex Ultra Copper high temp silicone is the best product for exhaust system slip fits during installation. It's the most advanced sealer available and resistant to extreme temperatures up to 700 degrees. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. |
| Permatex Ultra Copper High Temp Silicone | |
| Part No. P-UCS | $7.50 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. It will keep your new
Holeshot Slip-on or complete system looking new
forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $9.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.