Dale's GSX-R 1000 Holeshot high pipe fits the 2005 & 2006 models. It's one of the cleanest high pipes ever produced for a late model sport bike. The Holeshot high flow mid pipe is tucked up and in for maximum cornering clearance. It has a second bend in the center area for added heal room, which eliminates the need for an ugly heat shield. The mid pipe is ceramic coated in our satin black finish for clean stealth look that blends in with the frame. The Holeshot high pipe offers a healthy boost in mid range and a 6 to 7 full horsepower gain when run with Dale's matching Dynojet Power Commander map. The hand crafted 14" Comp 2 muffler is available in a fully polished or satin black powder finish. It offers a smooth low mid range tone that will come alive when you really nail that wonderful GSX-R mill and removes unwanted weight. The Holeshot muffler is a combination of 304 stainless and 6061-T6 air craft aluminum, and is assembled in-house by expert craftsmen. The laser cut powder coated muffler bracket tucks neatly behind the canister, and Dale's design allows the pegs to be run with the pipe or removed. Custom stainless clamps and hardware are included as well as instructions on how to bypass the FI warning light on the gauges.
Though the GSX-R 1000 can be run without a Power Commander and will perform well, it will be smoother, make more power and torque, plus eliminate any minor flat spots that you may already have now in stock form.
Dale's matching Dynojet Power Commander custom map will be free of charge to our Holeshot customers once you have purchased your new high pipe.
| Click here for Dyno charts |
|
05 GSX-R on-dyno video
This video clip shows Dale dyno testing the GSX-R 1000
with the 2005-2006 Holeshot High Pipe installed. File size: 5.2MB |
|
New for 2006 is the super clean, laser etched Holeshot Performance muffler end cap. Note! The silver and black Holeshot logo plate will not be on the muffler unless requested. It is now an option, which can be installed for an additional $5.00 per muffler. (Click image to enlarge) |
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems. See Below.
 |
Dale's GSX-R prototype high pipe, during a test day at Thunderhill Raceway.
Click on the image to enlarge!
|
|
Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge |
|
Polished muffler with optional Holeshot logo plate Click the image to enlarge |
| GSX-R 1000 Holeshot High Pipe Slip-on | |||
| polished comp 2 muffler | Part No. GSXR1-SOH | $434.00 | |
| satin black powder comp 2 muffler | Part No. GSXR1-SOHB | $444.00 | |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 | |
|
Permatex Ultra Copper high temp silicone is the best product for exhaust system slip fits during installation. It's the most advanced sealer available and resistant to extreme temperatures up to 700 degrees. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. |
| Permatex Ultra Copper High Temp Silicone | |
| Part No. P-UCS | $7.50 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. It will keep your new
Holeshot Slip-on or complete system looking new
forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $9.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.