Holeshot Performance Products, Inc.

Suzuki Katana 600 Suzuki Katana 750

The 1998+ Suzuki Katana 600 & 750 are just wonderful motorcycles at a great value. Our Holeshot® slip-on really looks beautiful on them.

The Holeshot slip-on offers a 4 to 5 horsepower gain and more usable mid range with a simple carb tweak. Furthermore, the slip-on weights about 50% less than the stock can. Your bikes sound will change to a nice & throaty, but mellow tone.

The slip-on provides the superior quality you would expect from a Holeshot Performance exhaust.

The beautiful Holeshot® muffler is hand crafted in-house from a combination of polished stainless steel and aluminum.

Dale's muffler design includes spun stainless front and rear end caps, beaded stainless turn-down tip, and a 4" aluminum outer skin. We precision fit the tip, then tig weld it to the end cap as it slowly spins in our electronically controlled rotator. This is done without the use of any welding rod for a superior bead. The end caps have a slight press fit into the can, then we air rivet them in place with stainless steel rivets. This assures your Holeshot® muffler will have a trouble free, long life expectancy. All the components are then highly polished for a beautiful finish.

The custom stainless band clamp has a high temperature fiberglass insulated tape on the inside to protect the muffler. It easily bolts up to the stock location.

The Holeshot® slip-on offers a very clean tucked in look.

Note: Does not include a center stand stop.

Our latest super clean, laser etched Holeshot Performance muffler end cap.
Note! The silver and black Holeshot logo plate is now an option, which customer installs.

(Click image to enlarge)

photo compliments of Ray Henley

Note! High Temp Silicone is required when installing our exhaust systems. See Below.

The Holeshot slip-ons are available in fully polished or a powder satin black canister with polished stainless end caps.

Holeshot Muffler DB Killers now available
Click on image for details

	Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge
	Polished muffler with optional Holeshot logo plate Click the image to enlarge

Click here for Dyno charts

Holeshot Katana slip-On
polished	Part No. KT-67SOS	$390.00
powder black	Part No. KT-67SOSB	$405.00
Holeshot logo plate (optional)	Part No. EX-NP	$5.00

Our full stepped header system is also available for the late model Katana 600 and 750. This will really make it run on top end and remove a considerable amount of unwanted weight. The Holeshot header comes with a 1 year ceramic coating warranty.

Our header may also be purchased separately at a later date as an upgrade to our Holeshot slip-on customer only.

Click here for Dyno charts

Holeshot Katana Stepped Header
Part No. KT-67VH	$509.00
Available separately to customers that have already purchased our Holeshot slip-on only.

Holeshot Stepped Header complete system
polished muffler	Part No. KT-67VHCS	$819.00
black muffler	Part No. KT-67VHCSB	$819.00
Holeshot logo plate (optional)	Part No. EX-NP	$5.00

Valco All-In-One High Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in non high temp applications as well. This product is a necessity to use if your installing our Holeshot slip-on or complete header system.

Valco All-In-One High Temp Silicone
Part No. V-HTS	$7.50

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Note: Magic Mix polish should not be used on our black header and muffler coatings.

Magic Mix Metal Polish (8 oz. bottle)
Part No. MM-P	$8.95

Magic mix speed wax, to maintain our satin black mufflers and ceramic black headers.

Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings.

Click here to see all our detailing products.

Magic Mix Speed Wax (16 oz. bottle)
Part No. MM-SW	$10.95

All orders plus shipping - Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.