Holeshot Performance Products, Inc.

D.I.D Chain, Lube & Maintenance Tools

D.I.D. ZVM-X 530 Super Street X-Ring Chain

Click image to enlarge

D.I.D's engineers are continuously improving chain designs in order to handle tremendous horse power loads of today's high performance motorcycles. The ZVM-2 was the best chain out there until now. In developing the new DID ZVM-X Series, they focused on rigidity. Traditionally, tensile strength has been the bench-mark to indicate overall strength, but tensile strength is only a laboratory static measurement of a chain's fracture point. Rigidity, on the other hand, is the ability of a chain to withstand the forces that occur in the real world that rider experience. Increased rigidity means better power transfer from the engine to the ground, greater resistance to stretching under load and overall improved performance that meets the demands of our current high-power bikes and the people who ride them. Available 110 and 120 link Natural finish, and 130 link Gold finish. All chains come with a press fit rivet type master link.

D.I.D. ZVM-X 530 Super Street X-Ring Chain
ZVM-X 530 110 Link	Part No. 122659	$174.00
ZVM-X 530 120 Link	Part No. 122660	$186.00
ZVM-X 530 130 Link	Part No. 122650	$212.00

Motorex 622 Synthetic Chain Lube

Dale has tested many chain lubes and his favorite to date is the Motorex 622 synthetic lube made in Switzerland.

This chain lube sprays on in a fine mist penetrating deep into the o-rings, x-rings and pins of the drive chain for the best possible lubrication. It resists extremely high pressures, is highly adhesive, resists fling-off, is thermaly stable and water resistant. This chain lube really reduces wear and friction big time.

Motorex 622 Synthetic chain lube comes in a large 16.9 oz. can and a convenient small 1.9 oz. refillable can to carry with you on your bike. This means you buy the small can one time and it can be refilled over and over again with the large can.

Motorex 622 synthetic chain lube
16.9 oz can	Part No. 980156	$13.50
1.9 oz can	Part No. 980085	$7.95

The Grunge Brush

Click image to enlarge

The Grunge brush is what you need to clean and maintain your chain for an extended life span. It's stiff built in nylon brushes get all sides of the chain and rollers without the mess all over your hands.

Use the Grunge brush with WD-40 or Kerosene then wipe the chain off with a clean rag. Cleaning the chain periodically will also make your sprockets last much longer.

The Grunge Brush
Part No. 35-1911	$11.95

Motion Pro Chain Breaker Riveting Tool

Click image to enlarge

The Motion pro chain breaker/riveting kit really is nice for doing your own work. The kit includes everything you need to cut your chain and mushroom over the new rivet type master link.

Includes plastic storage box and all necessary pins and sleeves.

Motion pro chain breaker/riveting tool kit
Part No. 150122	$109.95

All orders plus shipping - Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.