Holeshot Performance Products, Inc.

Bandit Chain, Sprockets, Lube & Maintenance Tools

D.I.D. ZVM2 530 X-Ring Chain

Click images to enlarge

The updated D.I.D. ZVM2 530 X-Ring chain is one of the strongest available offering 10,400 pound tensile strength. This was originally made as a replacement for the Hyabusa and ZX-12 R. Now you can take advantage of this super strong chain for your Bandit 1200 or 600. You can expect a much longer life span and much less stretching with this chain over the original. The ZVM2 chain comes with a crimp type master link and we offer the Motion Pro chain breaker and riviting tool kit as well which makes this job much easier for the home tuner.

Note: The ZVM2 chain is available in 112, 114 or 120 links and will need to be cut down a bit for you particular application.

D.I.D. ZVM2 530 Chain
112 Links	Part No. ZVM2-112	$158.00
114 Links	Part No. ZVM2-114	$158.00
120 Links	Part No. ZVM2-120	$165.00

Steel Drive sprockets

Click image to enlarge

These replacement front and rear steel drive sprockets are a lower cost alternative to the ones available from the factory. They fit well and will last a very long time with normal chain maintenance.

Bandit 600 & 1200 front countershaft sprockets
14 Tooth	Part No. 514-14	$24.00
15 Tooth	Part No. 514-15	$24.00
16 Tooth^*	Part No. 514-16	$24.00

* Note: Some trimming of the inner sprocket cover may be necessary to run the 16 tooth.

Bandit 600 rear steel Sprockets
47 Tooth	Part No. 465S-47	$44.00
48 Tooth	Part No. 465S-48	$44.00

Bandit 1200 rear steel Sprockets
44 Tooth	Part No. 469S-44	$55.99
45 Tooth	Part No. 469S-45	$44.00

Motorex 622 Synthetic Chain Lube

Dale has tested many chain lubes and his favorite to date is the Motorex 622 synthetic lube made in Switzerland.

This chain lube sprays on in a fine mist penetrating deep into the o-rings, x-rings and pins of the drive chain for the best possible lubrication. It resists extremely high pressures, is highly adhesive, resists fling-off, is thermaly stable and water resistant. This chain lube really reduces wear and friction big time.

Motorex 622 Synthetic chain lube comes in a large 16.9 oz. can and a convenient small 1.9 oz. refillable can to carry with you on your bike. This means you buy the small can one time and it can be refilled over and over again with the large can.

Motorex 622 synthetic chain lube
16.9 oz can	Part No. 980086	$11.95
1.9 oz can	Part No. 980085	$7.95

The Grunge Brush

Click image to enlarge

The Grunge brush is what you need to clean and maintain your chain for an extended life span. It's stiff built in nylon brushes get all sides of the chain and rollers without the mess all over your hands.

Use the Grunge brush with WD-40 or Kerosene then wipe the chain off with a clean rag. Cleaning the chain periodically will also make your sprockets last much longer.

The Grunge Brush
Part No. 35-1911	$11.95

Motion Pro Chain Breaker Riveting Tool

Click image to enlarge

The Motion pro chain breaker/riveting kit really is nice for doing your own work. The kit includes everything you need to cut your chain and mushroom over the new rivet type master link.

Includes plastic storage box and all necessary pins and sleeves.

Motion pro chain breaker/riveting tool kit
Part No. 35-5137	$109.95

All orders plus shipping - Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.