Dale's dyno developed design is one of the most efficient you can purchase for your CBR F2-F3. Bolting on the Holeshot™ pipe and simply shimming the needles .025-.030 will give you a 4-5 horsepower gain and a bunch more usable torque throughout the powerband. Re-jetting or adding a complete jet kit is not necessary. The Hondas are very close out of the box. We can provide you free shims with the purchase of your new Holeshot™ F2-3 Slip-on.

Features Include:
	Polished stainless high flow elbow pipe
	Fully polished or powder satin black canister
	Polished spun stainless end caps
	Stainless hardware and clamps included
	Weighs less than half than the stock unit
	Easy bolt on design

Click here for Dyno charts

Note: All black canisters are now available in satin, not gloss.

Our latest super clean, laser etched Holeshot Performance muffler end cap. Note! The silver and black Holeshot logo plate will not be on the muffler unless requested. It is now an option, which can be installed for an additional $5.00 per muffler. (Click image to enlarge)

Tuning and installation by Cycle Imports

Cycle Imports of Santa Cruz is now the official Holeshot Performance central and northern Ca authorized tuning and installation center. Call the owner Richard Oliveira today if you need any of our parts installed, or just need a shop you can trust to do very good work on your motorcycle with that personal touch. Click here for more info and be sure the let Richard know Dale Walker sent you From Holeshot.

Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems. See Below.

	Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge
	Polished muffler with optional Holeshot logo plate Click the image to enlarge

Bob Audio:
Dale,
I'm writing you this e-mail to tell you how much I like your slip-on for the Honda F3. I did plenty of research on all the different slip-on manufacturers and decided to go with yours. You seemed to have done your homework with respect to carburetor modifications (no need for after market jet kits) and dyno runs (proof of performance). Add this to your fit, finish and styling and you end up with a really nice plug and play system with all the guess work taken out of it. The slip-on is not too loud, but yet makes the bike sound strong. As you suggested, I shimmed the needles .030". I also found that the bike ran best with the pilot screws turned out 1.5 turns (49 state model). Even though I still couldn't get rid of the 4K flat spot, I don't feel too bad. The Honda engineers couldn't get rid of it either with the stock exhaust. The bike reaches redline quicker than before and without sacrificing any low or mid range power. Compared to the other well known names, I may have paid a little more, but it was well worth the price for the quality and personal tech support.

Bob
'97 Honda F3

---

CLICK FOR

CBR F4 HOLESHOT™ EXHAUST

Note: does not fit CBR F4i

Permatex Ultra Copper High Temp Silicone Permatex Ultra Copper high temp silicone is the best product for exhaust system slip fits during installation. It's the most advanced sealer available and resistant to extreme temperatures up to 700 degrees. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. Permatex Ultra Copper High Temp Silicone Part no. P-UCS $6.50 ea.

Keep Your Exhaust System Looking Like New!

Magic Mix Metal Polish Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It with keep your new Holeshot Slip-on or complete system looking new forever. It works fantastic on aluminum, stainless, chrome, and our sterling silver Jet Hot coated headers. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Magic Mix Metal Polish ( 8 oz. bottle) Part no. MM-P $8.95 ea.

Magic mix speed wax, to maintain our satin black mufflers and ceramic black headers.

Magic Mix Speed Wax Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. Magic Mix Speed Wax (16 oz. bottle) Part no. MN-SW $9.95 ea.

Click here to check out our Holeshot Team T-shirts and Hats!

   

All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Doing so is at the sole discretion of the buyer.
Holeshot Performance Products, Inc. & reg are trademarks of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. Copyright © 1998. All rights reserved. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

© Copyright 1998 Holeshot Performance Products®, Inc. All Rights Reserved.