Holeshot Performance is proud to be a U.S. importer for
these trick body components from Pyramid Plastics.
Pyramid Plastics is well known throughout the U.K. for
designing superior quality and good looking fiberglass
motorcycle products.
The finish of these body parts are smooth and slick,
and come in a very high gloss black gel coat finish.
They can be run as is or easily custom painted to any color.
Bandit Hugger
![]() |
Pyramid designs, manufacturers, and even invented the Hugger name. These hand made guards are available in high gloss black, with that exotic race spec look. Not that you're buying looks alone, a Hugger performs a vital function protecting the rear shock and linkage components from the worst elements a rear bike tire can dish out The Bandit Huggers are solidly mounted and require no modifications to the bike or swingarm when fitting. It also integrates a chain guard, unlike many other manufacturers. Full fitting instructions and stainless fasteners are included. Available in gloss black! Note: 2001+ B-12 may require trimming of the rear brake hose metal loop on the swing arm to install right hand hugger bracket. Now Available from Pyramid Plastics: Bandit 1200 Hugger in Carbon fiber. Click on the thumbnails for a larger view |
| Pyramid Plastics Bandit Hugger | ||
| '96-'99 Bandit 600 | Part No. B6-H | $169.00 |
| 2000+ Bandit 600* | Part No. B600-H | $169.00 |
| '96-'05 Bandit 1200 | Part No. B12-H | $169.00 |
| Carbon fiber Bandit 1200 Hugger | ||
| '96-'05 Bandit 1200 | Part No. B12-CH | $275.00 |
|
*2000+ B-6 hugger does not have integrated chain guard |
||
Lower Belly Pan
|
The Bandit Lower Belly Pan looks cool and makes your bike
stand out from the rest. It is very easily installed and is of the highest quality finish - as you would expect from Pyramid Plastics. Note: Mounting on Bandit 1200 requires making a simple spacer and providing longer bolt for the lower left mounting bracket. Belly pans are available in gloss black only! |
| Pyramid Plastics Belly Pan | ||
| '96-'99 Bandit 600 | Part No. B6-BP | $258.00 |
| 2000+ Bandit 600 | Part No. B600-BP | $258.00 |
| '96-'05 Bandit 1200 | Part No. B12-BP | $258.00 |
Front Fender Extender
|
The Fender Extenders do a great job keeping that nasty
dirt and grit off your exhaust system and engine's oil
filter area. They are custom made to fit the Bandit's front fender perfectly, not only for function, but also very good looks. Installation is quick and easy with supplied hardware. Note: Available in black only |
| Pyramid Plastics Fender Extender | ||
| '96-'99 Bandit 600 | Part No. B6-FEX | $42.00 |
| 2000+ Bandit 600 | Part No. BY2K-FEX | $42.00 |
| '96-'00 Bandit 1200 | Part No. B12-FEX | $42.00 |
| 2001-06 Bandit 1200 | Part No. BY2K-FEX | $42.00 |
All orders plus shipping - Prices subject to change without notice
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2010. All rights reserved.