Holeshot Performance Products, Inc.

Holeshot Electric Powershifter 2™
Barrel Trigger™

After eight months of testing and developement the Holeshot Barrel Trigger option has been made available for the Powershifter 2™. It allows the PS-2 kit to be installed without using the standard brake light type trigger switch, which requires fabricating a bracket and adjustment.

Note: Will not work on V-Max with the stock shift linkage. If you have rear sets installed with a longer shift rod then the Barrel Trigger may work for you.

The optional Holeshot Barrel Trigger™ is a 2 5/8" long x 9/16" o.d. cylinder that is mounted directly in the shift linkage rod. When compressed by pre-loading the shift pedal, it sends a signal to the PS-2 Kill Box triggering the unit, which momentarily kills the ignition. This allow lightning fast, clutchless, wide-open shifts.

The trigger requires zero adjustment and is not affected by footpeg or linkage adjustment, gearing changes or engine removal. Once installed with the PS-2 Kit, the only adjustment necessary is the kill time delay by simply turning the dial on the ignition kill box. It is also weatherproof. Very slick indeed.

Note: To use the Holeshot Barrel Trigger™ the transmission shift linkage rod must push, not pull when upshifting through the gears.

It will also work excellent on shifter karts.

The Barrel trigger is available with a pre machined stainless rod kit for the motorbike models listed below. This makes it a super quick and easy installation to your stock shift pedal assembly.

The Barrel Trigger and rod kit comes fully assembled.

Holeshot PS2 Barrel Trigger™
Part No. PS2-BT	$137.00

Holeshot PS2 Barrel Trigger™ and rod kits
Suzuki
SV650	Part No. SV-BTRK	$164.00
Bandit 600	Part No. B6-BTRK	$164.00
Bandit 1200	Part No. B12-BTRK	$164.00
Hayabusa	Part No. H-BTRK	$164.00
GSX-R 600/750 2000-05	Part No. GSXR-BTRK	$164.00
GSX-R 1000 2000-04	Part No. GSXR1-BTRK	$164.00
GSX-R 1000 2005-06	Part No. GSXR05-BTRK	$164.00
Kawasaki
ZRX-1100/1200	Part No. ZRX-BTRK	$164.00

All orders plus shipping - Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.