Holeshot Performance Products, Inc.
Report an issue with this page...

Holeshot Bar Riser Kit Installation Tips

DL-1000 V Strom
NOTE: These numbered photos are to be used as a guide in conjunction with the written instruction sheet supplied with the kit.
Be sure to review all photos before you start the installation, feel free to call Dale if you have any questions.
775-463-5394
1

Remove the bar mounts, then install the machined risers with provided longer bolts and original hardware

2

Install back in top crown, use new nylock nuts and only lightly snug for now

3

Remove brake line holder from lower triple clamp

4

Carefully peel off the rubber grommet from the brake line

5

Slightly spread open the brake line holder so the line can float in the opening

6

Re install the brake line holder

7

Make any final adjustments and be sure to torque all hardware to my specs in the install sheet