Holeshot Performance Products, Inc.
Report an issue with this page...

Holeshot Comfort Bars

Suzuki DL-1000 V-Strom (2014+)
Proudly made in America!

Dale tested quite a few of the bar risers and bar backs out there, and just was not happy with the out come or the erector set look of all that stuff bolted together. Instead he thought out of the box and got to work on testing the new Holeshot 2014 + DL-1000 V-Strom Comfort Handle Bars. After making 3 prototype sets with different bends and rises the finished product is just what the doctor ordered. Dale feels the stock bend is not the real issue, and that mostly they needed to be closer to the rider and only slightly higher. The Holeshot Comfort bars are approximately 3/4" to 1” inch higher, 1.5" to 2.0" inch closer to the rider, and about 30 " inches wide. This will depend on how you have them adjusted of course. They are CNC bent and made from DOM American 7/8" inch steel tubing, then powder coated in a 60 % gloss satin black finish. The ID will fit the original bar ends, after market or the Throttlemeister, but the ID must be drilled or dremeled slightly for a proper fit. The customer must drill the holes for the switches once you have the bars installed, or simply dremal off the tips in the housings. The stock brake line reaches with a minor teak adjustment, the cables and wires looms reach but some minor re-routing is required. If you have a hard time reaching your stock bars or your shoulders start killing you when you ride, then consider giving the new V-Strom Holeshot Comfort Bars a try. You wont be sorry.

The Holeshot Comfort Bars also fit every year model DL 650 & 1000
NOTE: These are a non returnable item, so please ask Dale any questions you may have before you purchase!
Holeshot Comfort Bars for Suzuki DL-1000 V-Strom (2014+)
DescriptionPart #Price
Comfort BarsHCB$109.00 / each
All orders plus shipping - Prices subject to change without notice
These are a non-returnable item!
Superbike Pro Gel Grips
Superbike Pro Gel Grips
Superbike Pro Gel Grips

The Superbike Pro Gel Grips feature a gel system design with an exclusive dual formula for greater comfort and much less vibrations, to help eliminate numbing of the hands. The Street grips are 120 mm long with open ends to fit with stock or after market bar end weights.These are really nice grips that make a world of difference, and are still not too large in diameter like many other comfort type grips on the market. They come in a gray and black or all black as shown.

NOTE: Some throttle sleeves may have a plastic ring attached that will need to be trimmed off to install new grips. Grips should always be glued in place.
DescriptionPart #Price
All Black17-9932$16.79 / set
All orders plus shipping - Prices subject to change without notice