Dales Adjustable struts for the 2003+ SV 650 are an easy bolt on. These will
raise the bike about 1/2" or lower it 1".
Raising the back will quicken up the steering a bit for the
canyon carver plus add needed ground clearance. Lowering the
back makes it more flat footed for shorter rider and also makes for
much harder drag strip type launches if you're a weekend warrior at
your local track.
These can be adjusted in minutes by removing the lower mounting
bolt only. They are precision laser cut from 1018 steel so strength
is not an issue. The super tough finish is a beautiful laser black
powder coat with a slight metallic silver added.
| Holeshot 2003+ SV 650 adjustable struts | |
| Part No. SV03-AS | $64.95 per set |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2010. All rights reserved.