Holeshot 1999-02 SV-650 High Pipe Slip-On

The Holeshot SV650 High Pipe Slip-On really looks trick and delivers the performance you would expect from Holeshot Performance. It is handcrafted from high grade stainless steel and aluminum components offering over 50% weight reduction from stock.

This simple design requires cutting the muffler tube in an easily accessible location and can be installed in about 20 minutes. This design allowed us to keep the cost down compared to others available mufflers, without sacrificing performance.

As far as sound goes, our 14" inch high mount muffler has a very throaty, but smooth tone that is slightly louder than our standard slip-on. You can expect a maximum of 3-6 horsepower gain, and more midrange from the Holeshot High Pipe Slip-on. You can expect a maximum of 3-6 horsepower gain, and more midrange from the Holeshot High Pipe Slip-on.

If you want a bad ass exhaust note and a real shorty muffler look, then go for our new 10" bad boy Comp 2 option. Available in satin black only, and please dont blame Dale if get to much attention with this one installed on your SV.

Note! The rear foot pegs can be retained or removed.

Replacing the rear blinkers is necessary. Most customers install our rear Fender Elinimator Kit - which includes the blinkers - to finish up the job.
Click here for more info.

Note! High Temp Silicone is required when installing our exhaust systems. See Below.

The Holeshot slip-ons are available in fully polished or a powder satin black canister with polished stainless end caps.

Holeshot 1999-02 SV-650 High Pipe Slip-On
polished	Part No. SV-SOH	$440.00
powder black	Part No. SV-SOHB	$450.00
powder black 10" Bad boy	Part No. SV-SOHB-10C2	$459.00
Heat shield (optional)
Part No. 08-1651		$28.00
Holeshot logo plate (optional)
Part No. EX-NP		$5.00

Valco All-In-One High Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one of the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in non high temp applications as well. This product is a necessity to use if you are installing our Holeshot slip-on or complete header system.

Valco All-In-One High Temp Silicone
Part No. V-HTS	$7.50

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Magic Mix Metal Polish (8 oz. bottle)
Part No. MM-P	$8.95

Original Bike Spirit Spray Cleaner & Polish

Dale loves this product and often uses it around the shop here at Holeshot . It very well may be the best quick cleaner and polish on the planet. The Original Bike Spirits Spay Cleaner and Polish comes in a aerosol 14 oz. can. This product was formerly branded by Honda and other OEMs, but now is available right from the source. OBS works fantastic on Paint, windscreens, face shields, bare aluminum, chrome , even plastic, vinyl & leather. On leather riding gear it cleans off dirt and bugs without harming the pigment.

Note ! Some flat black surfaces should be tested in a small area first. We highly recommend this product for daily use to keep your bike and gear in tip top shape as well as looking good.

OBS 14 oz. Cleaner & Polish
Part No. OBS-14	$7.95

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.

	Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge
	Polished muffler with optional Holeshot logo plate Click the image to enlarge
	Our latest super clean, laser etched Holeshot Performance muffler end cap is now standard. Click the image to enlarge
	An optional heat shield is also available for those who may get their heel against the mid pipe while riding. This may only be needed depending on your riding style or if you have a very large foot size. Dale recommends running the pipe a while first to determine if you need to add this or not. Click the image to enlarge