Once you've mounted the Throttlemeister bar ends to your bike, they work like this: All of the workings of the Throttlemeister are inside the bar end itself. Once mounted, you turn the whole bar end in the same direction as opening the throttle. A piston moves in and out of the Throttlemeister itself and puts friction against the throttle tube, which in turn counteracts the throttle return spring. When installed properly, the Throttlemeister will not completely lock the throttle. You can always override the Throttlemeister in any situation. If you need to stop quickly you can just grab the throttle and turn it off.
Throttlemeister video #1
This video shows Dale operating the throttlemeister.
File size: 5.7MB
Throttlemeister Video #2 (close-up)
This video shows a close-up view of operation.
File size: 4.4MB
Throttlemeister Safety Warning
As with any part or accessory on a motorcycle, improper installation and / or use of the Throttlemeister could cause SERIOUS INJURY or DEATH. Riding a motorcycle is an inherently dangerous activity, and as such should be treated with the utmost respect. The Throttlemeister should never be used by inexperienced riders. Before riding, become acquainted with the operation of the Throttlemeister. Inform anyone who is going to use your cycle that the Throttlemeister is installed and how to disengage it. Do not use in traffic. Do not use on race track or for stunt riding. Do not use in a residential or urban area. Do not use in any situation where precise throttle control is needed. Never take your hands off the handlebars. Always wear a helmet, eye protection and protective clothing when riding.
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.
Copyright (c) 1998-2013. All rights reserved.