Holeshot Performance Products, Inc.
Report an issue with this page...

Holeshot High Pipe Slip-On

Yamaha FZ1 Gen 2 (2006+)

NOTE: This product is not legal, for sale or use on California vehicles!

NOTE: Close-out Special on remaining stock only; once these are gone they will be gone for good!

After months of testing Dale's 2nd Generation FZ1 high pipe slip-on is now ready to rock and roll. It really flows beautifully with the lines of the bike and is arguably the nicest looking FZ1 pipe produced for the new model. It is hand crafted in-house from high grade 304 stainless and 6061-T6 aluminum. It comes with all custom stainless clamps - no springs here, and Dale's special tapered inlet elbow pipe for maximum flow rate. The high pipe has superior ground clearance, is very light weight and retains the center stand utilizing our super clean CNC machined center stand stop. We even designed a special laser cut, powder coated hanger bracket that tucks behind the specific 14" high pipe muffler for a ultra clean look. The Holeshot high pipe also allows you to retain or remove the rear foot pegs with the machined aluminum spacers and hardware provided in the kit. It is available in fully polished or in our powder black version cannisters. Our mufflers are available in our popular Comp 1 version or our slightly more subtle street core, and both have our laser etched Holeshot logo on the back surface of the polished stainless end cap. The optional Holeshot oval name plate can be added to the side of the canister if desired. The fit and finish is superb and installation is very straight forward with Dale's included detailed instructions.

An optional heat shield is also available for those who may get their heel against the mid pipe while riding. This may only be needed depending on your riding style or if you have a very large foot size. Dale recommends running the pipe a while first to determine if you need to add this or not.

NOTE: Our Holeshot Rear Fender Eliminator w/ Flush Mount Blinkers is mandatory to run this Holeshot High Pipe Slip-On!

Dale prefers the Holeshot EFI Supertune tuning box over more expensive and complicated methods of tuning electronic fuel injection. The EFI Supertune does NOT require re-mapping of the EFI. It is a simple tuning box that can add fuel in the low, mid and top end RPM range. Dale will give you his matching base settings when you purchase the tuning box and slip-on from Holeshot. The EFI Supertune will also work with any other brand exhaust system. Dale worked with Dobeck performance to come up the 2006 FZ1 EFI Supertune tuning box, which is a completely plug-in unit, so no wire splicing is needed to install the kit.

Dale also highly recommends a minor gear ratio change to improve low end and mid-range response. There is no reason this motorcycle needs to go 85 MPH before hitting the rev limiter in first gear. The original front 17-tooth counter shaft sprocket is easily changed to the Holeshot 16-Tooth Counter Shaft Sprocket we offer and will make a dramatic difference in performance.

The Holeshot Slip-Ons are available in fully polished or a powder satin black canister with polished stainless end caps.

Click Here for Dyno Charts

Holeshot High Pipe Slip-On for Yamaha FZ1 Gen 2 (2006+)
Description Part # Price
Polished 14" Comp 1 FZ106-SOHP-14C $419.00 / each
$339.00 / each
Polished 14" Street FZ106-SOHP-14S $419.00 / each
$339.00 / each
Black 14" Comp 1 FZ106-SOHB-14C $429.00 / each
$349.00 / each
Black 14" Street FZ106-SOHB-14S $429.00 / each
$349.00 / each
Holeshot Logo Plate (Optional) EX-NP $5.00 / each
Heat Shield (Optional) 08-1651 $28.00 / each
All orders plus shipping - Prices subject to change without notice
High-Temp Silicone
Valco All-In-One High-Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one of the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in non high temp applications as well. This product is a necessity to use if you are installing our Holeshot slip-on or complete header system.

Description Part # Price
High-Temp Silicone V-HTS $7.50 / each
All orders plus shipping - Prices subject to change without notice
Magic Mix
Magic Mix

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Description Part # Price
Magic Mix (8oz Bottle) MM-P $9.95 / each
All orders plus shipping - Prices subject to change without notice
Original Bike Spirits - Spray Cleaner & Polish
Original Bike Spirit Spray Cleaner & Polish

Dale loves this product and often uses it around the shop here at Holeshot . It very well may be the best quick cleaner and polish on the planet. The Original Bike Spirits Spay Cleaner and Polish comes in a aerosol 14 oz. can. This product was formerly branded by Honda and other OEMs, but now is available right from the source. OBS works fantastic on Paint, windscreens, face shields, bare aluminum, chrome , even plastic, vinyl & leather. On leather riding gear it cleans off dirt and bugs without harming the pigment.

Description Part # Price
Spray Cleaner & Polish (14oz Can) OBS-14 $9.99 / each
All orders plus shipping - Prices subject to change without notice