The Holeshot ZRX 1100/1200 complete 4-1 header system is hand made in house by our expert fabricator Paul McCain. Dale spent over five months developing this new pipe spending countless hours of dyno and road testing. It has total oil and filter access, more cornering ground clearance and removes a ton of weight. The sound level is fairly mellow, but still healthy when you whack it full open. If horsepower with a strong mid range is what you are looking for then the Holeshot Performance System will deliver. Dale managed a whopping 24hp and 10 ft-lb. gain when run in conjunction with his stage 2 jet kit. The complete header system is available in black only, and our stainless/aluminum clean slip fit mufflers are available fully polished and a satin powder black finish.
 |
Click here for ZRX-1100 Dyno charts Click here for ZRX-1200 Dyno charts |
We also offer a ZRX 1100/1200 header upgrade kit. This allows you to install Dale's Holeshot front header section only with any after market slip-on. Click here for info.
The Holeshot header coating comes with a 1 year anti rust warranty to the original purchaser.
Note! The ZRX Front Fender Extender must be purchased for us to honor our header coating warranty. Click here to see Front Fender Extender.
The Holeshot header system removes approximately 15 lbs. of unwanted weight.
|
New for 2006 is the super clean, laser etched Holeshot Performance muffler end cap. Note! The silver and black Holeshot logo plate will not be on the muffler. The optional logo plate is sold seperatly, customer installs. (Click image to enlarge) |
Note! High Temp Silicone is required when installing our exhaust systems. See Below.
  |
Photos courtesy of Larry Bergman, Lincoln Nebraska Click on image to enlarge! |
 |
Photo courtesy of Dan Baerman Click on image to enlarge! |
 |
Hi Dale, I have your system on my 2000 ZRX 1100 the sound is AWESOME, and it looks GREAT. to date i have Wiseco 1109 big bore kit, Holeshot stage 2 with K&N pods, Muzzys cams and a 50 shot of nitrous from NOS. It makes 138.7hp 86.64tq on motor 182.1hp 158.3tq on the bottle Thanks for a GREAT product and excellent service and support, looking forward to the new MEGAPHONE system that is in the works Jimmy |
 |
We made sure our new pipe is tucked up for good ground clearance as well as much more oil and filter access over the stock header. |
 |
Dale's design tucks the muffler in much closer to the shock, like it should have been to begin with from the factory. A new centered stainless band clamp is also included in the upgrade kit that matches this mounting point. Note: the muffler cannot be moved closer to the shock with out our header system. |
 |
Dale proudly displays first Holeshot™ Performance ZRX header. |
 |
Dale's ZRX-1200 made 130.2 hp @ 85.6 ft. lbs. on his Dyno in conjunction with his Stage 2 Jet Kit. Wow! |
 |
Holeshot Muffler DB Killers now available Click on image for details |
|
Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge |
|
Polished muffler with optional Holeshot logo plate Click the image to enlarge |
| ZRX Holeshot Header, complete system | ||
| polished muffler | Part No. ZRX-HC | $789.00 |
| powder black muffler | Part No. ZRX-HCB | $789.00 |
| Holeshot logo plate (optional) | Part No. EX-NP | $5.00 |
.jpg)
|
Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one of the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in non high temp applications as well. This product is a necessity to use if you are installing our Holeshot slip-on or complete header system. |
| Valco All-In-One High Temp Silicone | |
| Part No. V-HTS | $7.50 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. It will keep your new
Holeshot Slip-on or complete system looking new
forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $10.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2011. All rights reserved.