Dale's Holeshot ZRX 4-1 Complete meg system includes our Comp 2 removable race baffle with stainless laser marked end cap, and our custom hand fabricated dual tube hanger bracket. It makes big power gains, is tucked up nice and tight for a clean look, and offers good cornering clearance, but not as much as our normal Comp muffler system. The Holeshot Logo plate with rivets are included and can be easily installed if desired.
Note! The meg back half with bracket can also be purchased separelty if you already have our Holeshot ZRX 4-1 complete header system.
Note! Permatex Ultra Copper High Temp Silicone is required when installing our exhaust systems.
| Holeshot ZRX 4-1 Meg System | ||
| ZRX 4-1 Complete Meg system | Part No. ZRX-MHC | $749.00 |
| Rear meg slip-on (back half only) | Part No. ZRX-MSO | $419.00 |
.jpg)
|
Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in none high temp applications as well. This product is a necessity to use if your installing our Holeshot slip-on or complete header system. |
| Valco All-In-One High Temp Silicone | |
| Part No. V-HTS | $7.50 |
 |
Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings. Click here to see all our detailing products. |
| Magic Mix Speed Wax (16 oz. bottle) | |
| Part No. MM-SW | $9.95 |
|
Magic Mix is known as the lazy man's polish and for a
good reason. It's absolutely the best and easiest to use
metal polish we've ever tested. We highly recomend using this polish on the stainless rear Holeshot end cap and lower clamp. It works fantastic on aluminum, stainless, and chrome. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes. Note: Magic Mix polish should not be used on our black header and muffler coatings. |
| Magic Mix Metal Polish (8 oz. bottle) | |
| Part No. MM-P | $8.95 |
Disclaimer
All Holeshot Performance Products are intended for closed course racing
purposes only, never to be used on any road or highway anywhere in the world.
Many of our products are illegal on pollution controlled vehicles so installing
them is at the sole discretion of the buyer. Be sure to check your local laws.
Holeshot Performance Products is not responsible for any engine damage that
may occur from improper installation of any of its products.
Holeshot Performance Products, Inc. ® is a trademark of Holeshot
Performance. Any other product names are the trademarks of their respective
holders. All rights to use this publication are exclusively owned by, and
proprietary to, Holeshot Performance Products, Inc.
No part of this publication or
web site may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without first obtaining written permission from
the publisher.
Copyright (c) 1998-2008. All rights reserved.