Holeshot Performance Products, Inc.

Close-out Special on remaining stock only
Once these are gone they will be gone for good

This price is under our build cost

Holeshot Kawasaki ZZR-1200 Slip-ons

Dales new ZZR-1200 slip-ons really wake up the bike, offer a nice smooth exhaust note and are a real work of art. They are hand assembled in-house and constructed from polished high grade stainless and 6061-T6 aircraft aluminum and also offer a weight reduction of nearly 15lbs. The Holeshot canisters are also availabe in our beautiful powder satin black finish with our polished stainless front and back end caps. The ZZR Holeshot slip-ons can be installed without any modifications to the bike and also include all high-end stainless hardware. Dale also designed a very clean center stand stop for the left elbow pipe so the stand does not bang on it when retracted. To complete the package for our customers we include new header pipe gaskets and needle shims to dial in the carbs for very smooth running and peak performance.

A full 7 to 10 horsepower gain and 4 to 6 ft-lbs of torque can be expected when run with Dales very simple carb adjustment which is free of charge.

Note: Installing a jet kit is not necessary to achieve the above mentioned performance gains and overall smooth running with our ZZR slip-ons installed.

Click here for Dyno charts

Note! High Temp Silicone is required when installing our exhaust systems. See Below.

	Powder satin black muffler with optional Holeshot logo plate Click the image to enlarge The cost to have the optional logo plate installed is $5.00 per muffler.
	Polished muffler with optional Holeshot logo plate Click the image to enlarge
	Our latest super clean, laser etched Holeshot Performance muffler end cap is now standard. The silver and black Holeshot logo plate will not be on the muffler unless requested. Click the image to enlarge

Installation tips

Click here for our Slip-Ons installation tips and our simple carburetor tweak to make your ZZR run great!

Pictures

Click images to enlarge

Note: All black canisters are now available in satin, not gloss.

ZZR 1200 Fly-by video

Dale road testing the Holeshot ZZR-1200 slip-ons and carb work at his secret proving grounds.This drive by is at 183 to 185 mph indicated!! Man that thing sounds good at speed.

All of Dale's testing is done on a private road or a closed course race track only.

Click the image to the left to see the video.

File size: 11.9MB

ZZR 1200 Sound check video

Short video clip showing off the sound of the Holeshot Slip-ons mounted to a ZZR 1200. This video was contributed by one of our customers.
Click the image to the left to see the video.

File size: 1.4MB

Holeshot ZZR 1200 Slip-ons
Polished Slip-ons	Part No. ZZR-SOP	$629.00 Close-out $529
Powder Black Slip-ons	Part No. ZZR-SOB	$649.00 Close-out $549
Holeshot logo plate (optional)	Part No. EX-NP	$5.00

Valco All-In-One High Temp Silicone

Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in none high temp applications as well. This product is a necessity to use if your installing our Holeshot slip-on or complete header system.

Valco All-In-One High Temp Silicone
Part No. V-HTS	$7.50

Holeshot 3mm Ball Extension driver for carb removal

Click image to enlarge

This high quality driver with 3mm ball end is just the ticket to reach those hard to get to carb intake manifold screws on the FZ1 and ZZR. The length and small shaft really make it a breeze for easy carb removal. Without the right tool this is a real pain. It features a sure grip comfort handle and high toque steel 10.5" shaft.

Holeshot 3mm Ball Driver
Part No. H-BD	$16.00 ea.

Keep your new Holeshot exhaust looking like new!

Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever.

It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.

Note: Magic Mix polish should not be used on our black header and muffler coatings.

Magic Mix Metal Polish (8 oz. bottle)
Part No. MM-P	$8.95

Magic mix speed wax, to maintain our satin black mufflers and ceramic black headers.

Magic Mix Speed Wax is a quick and easy way to give painted and clear coat surfaces a super high gloss finish. It applies a thin, wax protective coating. Speed Wax is a great product to use in between your Super Glaze carnauba waxing intervals. If you are in a hurry this is the product. It works very well on our optional ceramic black header and satin black muffler coatings.

Click here to see all our detailing products.

Magic Mix Speed Wax (16 oz. bottle)
Part No. MM-SW	$10.95

All orders plus shipping - Prices subject to change without notice

Disclaimer
All Holeshot Performance Products are intended for closed course racing purposes only, never to be used on any road or highway anywhere in the world. Many of our products are illegal on pollution controlled vehicles so installing them is at the sole discretion of the buyer. Be sure to check your local laws. Holeshot Performance Products is not responsible for any engine damage that may occur from improper installation of any of its products. Holeshot Performance Products, Inc. ® is a trademark of Holeshot Performance. Any other product names are the trademarks of their respective holders. All rights to use this publication are exclusively owned by, and proprietary to, Holeshot Performance Products, Inc. No part of this publication or web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, without first obtaining written permission from the publisher.