Report an issue with this page...
Holeshot 2003 SV 1000 S Dual High Pipe Slip-Ons
Due to popular demand, Dale has decided to go back into production on this exhaust
The Holeshot SV-1000 S dual high pipe slip-ons are a hand crafted work of art and really look beautiful on the bike. Dale spent several months getting this set just right as well as many hours testing a selection of mufflers cores resulting in a healthy but smooth exhaust tone. You can expect nearly identical power gains from the dual high pipes as our bolt on slip-ons. The set includes polished 304 stainless mid pipes, custom clamps / hardware, mounting bolts and machined spacers to either run or not run the rear passenger pegs. The hanger brackets are laser cut, made in house, then powder coated gloss black. The 14" Holeshot Stainless/Aluminum canisters are available in fully polished or with Satin black powder outer shells.
Most SV-650/1000s run pretty well when adding a slip-on if you stick with the original air filter, but if you want to really smooth out the power curve, ad more mid range and top end power, along with very good fuel mileage, Dale highly recommends the EFI Supertune tuning box. He has been EFI tuning the DLs for two years now with great results. This is a much easier way to dial in your EFI than any other method and dyno tuning and re-mapping are not necessary.
The dual high pipe set is a pretty straight forward install that any home tuner can do and complete installation instructions are included. Note! The header pipes must be cut to install this set, Dale did not want two ugly four bolt flanges in the mid pipes, so this is a much cleaner set up.
Click Here to view dynocharts
Click Here to view EFI Supertune tuning box information
Click Here for info to eliminate decel popping when a slip-on is added on the 2003+ model SV-650/1000s.
Click Here to see where to cut the header pipe.
Optional Holeshot
Performance Logo Plate
Optional Holeshot
Performance Logo Plate
Holeshot Muffler End-Cap
Now Standard!
Click Here to see the page and more info!
| Description | Part # | Price |
| Fully Polished | SV1-SOH | $739.00 / each |
| Satin Powder Black | SV1-SOHB | $739.00 / each |
| Holeshot Logo Plate (Optional) | EX-NP | $5.00 / each |
 | Valco All-In-One High-Temp Silicone Valco All-In-One High Temp Black Silicone is ideal for exhaust system slip fits during installation. It's one of the most advanced sealers available, is resistant to extreme temperatures up to 600 degrees, and can be used in non high temp applications as well. This product is a necessity to use if you are installing our Holeshot slip-on or complete header system.
All orders plus shipping - Prices subject to change without notice
|
 | Magic Mix Keep your new Holeshot exhaust looking like new!Magic Mix is known as the lazy man's polish and for a good reason. It's absolutely the best and easiest to use metal polish we've ever tested. It will keep your new Holeshot Slip-on or complete system looking new forever. It works fantastic on aluminum, stainless, chrome and our coated slip-ons or full header system. We use it daily in our workshop during final assembly, as well as, on all our personal vehicles. It can even be used to rub out fine scratches on painted clear coated finishes.
All orders plus shipping - Prices subject to change without notice
|
 | Original Bike Spirit Spray Cleaner & Polish Dale loves this product and often uses it around the shop here at Holeshot . It very well may be the best quick cleaner and polish on the planet. The Original Bike Spirits Spay Cleaner and Polish comes in a aerosol 14 oz. can. This product was formerly branded by Honda and other OEMs, but now is available right from the source. OBS works fantastic on Paint, windscreens, face shields, bare aluminum, chrome , even plastic, vinyl & leather. On leather riding gear it cleans off dirt and bugs without harming the pigment.
All orders plus shipping - Prices subject to change without notice
|