Report an issue with this page...
Kawasaki ZZR 1200 Slip-On
Installation and Carburetor Tuning Tips
IMPORTANT: THIS IS LEGAL FOR OFF-ROAD CLOSE COURSE USE ONLY!
NOTE: These numbered photos are to be used as a guide in conjunction with the written instruction sheet
supplied with the kit. Be sure to review all photos before you start the installation, feel free to call
Dale if you have any questions.
775-463-5394
775-463-5394
1 | |
  | |
Using a reciprocating cutting saw with good blade, cut header tube just in front of weld bead as shown. Stainless steel is tough so have 3 or 4 blades handy for this step. | |
2 | |
  | |
With the cut made use a 3/4" to 1" drill bit to drill a center hole in remaining cat. Be sure to stop when you feel it touch the divider plate in the collector, or drill a little at a time and keep an eye on it. | |