Holeshot Performance Products, Inc.
Report an issue with this page...

Tuning Tools

Float Gauge
Holeshot Float Gauge

Adjusting your floats to the proper level is a very critical part of setting up your new jet kit. This high quality float gauge is what it takes to do it right. This gauge works on all types of carbs.

Part #Price
PP2699$35.95
All orders plus shipping - Prices subject to change without notice
Suzuki Deluxe Valve Adjustment Tool
Suzuki Deluxe Valve Adjustment Tool

This tool is a must have for adjusting your own valves. It's made specifically to fit the Bandit, Katana & GSX-R air oil cooled engine adjuster screws, making the job much easier. This tool is high quality with a large plastic knurled knob.

Part #Price
B-VAT$12.95
All orders plus shipping - Prices subject to change without notice
Float Gauge
32-Blade Dual-Reading Feeler Gauge Set

This quality Feeler Gauge set works great for getting in tight areas when doing your valve adjustments. Features hardened and polished 4" long tapered blades marked in millimeters & inches from .001" to .040".

Part #Price
15-1527-1$10.95
All orders plus shipping - Prices subject to change without notice
Float Gauge
Holeshot Piston Base Holders

These aluminum 3/16" thick computer machined piston base holders are a must for the installation of new high compression pistons or a big bore kit. These go under the piston skirts supporting them between the top engine case. This eliminates piston rock which can turn it into a real hassle to install the cylinder and also can cause piston ring breakage. We recommend ordering two piston base holders for assembling 4 cylinder engines.

Part #Price
35-9810$14.95
All orders plus shipping - Prices subject to change without notice
Float Gauge
Holeshot Performance Cam Degreeing Kit

Dale's Cam deegreeing kit makes it simple for any home tuner or pro to dial in your motorcycle cam timing for more power and torque.

The exclusive, Holeshot designed kit includes:

  • 1" sweep dial indicator with 3 inch extension to reach hard to get to retainers or tappets
  • Magnetic indicator stand with fine adjustment
  • Holeshot Performance degree wheel
  • 10mm, 12mm & 14mm CNC billet machined positive piston stops to fit any engine
  • Dale's own twenty minute video DVD, Step-By-Step Cam Degreeing, so anyone can easily learn
  • Tools lay in die cut foam and are protected by a highly impact resistant snap shut plastic carrying case
Description Part # Price
Complete Cam Degreeing KitCDKDISCONTINUED $276.00 / each
Cam Degreeing DVD Only CDK-DVD $28.95 / each
Holeshot Degree Wheel Only HP-1000 $18.95 / each
All orders plus shipping - Prices subject to change without notice
Float Gauge
Holeshot Vacuum Gauges

A good carb sync is the finishing touch to any tune up or after installing a jet kit to insure a smooth idle, good throttle response and fuel mileage. These vacuum gauges do a very good job at a very reasonable price for the do-it-yourself home tuner.

They include: Vacuum gauges on a sturdy mounting plate, 5mm port adapters, in-line dampers for fine adjustment and hoses. Available for 4cyl. or 2cyl. motors.

DescriptionPart #Price
4-Cyl Gauge Set35-7295$91.95
2-Cyl Gauge Set35-7294$72.95
All orders plus shipping - Prices subject to change without notice
Float Gauge
Motion Pro Auxiliary Fuel Tank

This impact resistant, portable fuel tank takes the place of the original gas tank while performing carb synchronizing. Includes 4 ft of 1/4" fuel line and a brass petcock.

Part #Price
35-6897$52.99
All orders plus shipping - Prices subject to change without notice
Float Gauge
Mityvac Brake Bleeder

The Mityvac Brake Bleeder Kit makes bleeding your brakes or clutch a snap and it is a must have when installing new brake lines.

It creates a vacuum pulling the fluid from the reservoir down to the bleeder valve quickly without any mess or hassle. The complete kit includes the plastic body Mityvac, a reservoir jar with plastic transfer lid, a brake bleeding adapter package, 24 inches of tubing and instruction manual.

Part #Price
35-5904$48.95
All orders plus shipping - Prices subject to change without notice
Float Gauge
Oil Filter Strap Wrench

The oil filter strap wrench makes removing any motorcycle spin-on oil filter an easy job. It features a heavy duty nylon strap and chrome plated hex head 3/8 driver so a ratchet and extension can also be used if necessary.

Part #Price
35-7933$8.50
All orders plus shipping - Prices subject to change without notice